Sentek LMC-J-0040-1 Bedienungsanleitung PDF herunterladen (Seite 14)

IMJ00503 V3E.DOC Page 14 of 40 19.02.2009

4.4 Connector Pin Assignments

Fig. 3: Pinning diagram

For operation via Profibus, other Profibus participants may connect to the 5 pole jack (A wire, B

wire). The Profibus may terminate or continue at the 5 pole connector. Some kind of

termination device must always be provided at the end of the Profibus. Supply voltage for the

bus terminator is available at Profibus OUT.

4.5 Profibus Interface

4.5.1 ID Number

The LMC J 0050 3 has been registered with “PROFIBUS Nutzerorganisation e.V.

(PROFIBUS User Organization, incorporated society) under ID number 09CB (HEX).

4.5.2 Interfacing Requirements

The LMC J 0050 3 is prepared for connection to any type of Profibus DP structure.

The related Profibus DP Master must be capable of sending a parameterization telegram. The

Master’s own configuring tool (typically configuring software) must support representation of the

parameters which are contained in the LMC J 0050 3 Master file (GSD file).

4.5.3 GSD File

The GSD file is named LMCJ40_3.GSD. It includes the two files “LMCJ40_3.dib” and

“LMCJ40_3.bmp” which are necessary for representation of the LMC J 0040 3 in the configuring

tool. For information regarding integration of these files, please consult the special

documentation parts that relate to the configuring tool.

white

brown

green

yellow

gray

orange

blue

red

black

violet

white/brown

white/black

Device Terminal

green

red

green

red

Power

10V .... 30V

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 38 39

Keine Kommentare

Sentek LMC-J-0040-1 Bedienungsanleitung Seite 14