Sentek LMC-J-0040-1 Bedienungsanleitung PDF herunterladen (Seite 6)

IMJ00503 V3E.DOC Page 6 of 40 19.02.2009

1. General

The LMC J 0050 3 is an opto electronic distance measuring module for industrial applications.

Equipped with a Profibus

DP interface, the LMC J 0050 3 can easily be integrated into any

fieldbus driven process controller. The additional SSI interface provides another convenient

option for controlled operation of the measuring module.A compact and robust design shape

combines with low power consumption, selectable switching outputs and the possibility to set

specific application parameters to warrant flexibility in use.

You should not start using the LMCJ00503, unless you have read this User Manual and

familiarized yourself with all safety notes contained in it. This is necessary to ensure that your

opto electronic distance measuring module can be used in the best possible way and damage

will be prevented.

2. Safety Instructions

2.1 Basic Notes

These safety and operating instructions should be carefully read and followed during practical

work with the LMC J 0050 3.

There is danger of laser radiation or electrical shock. For necessary repair

work, the LMC-J-0050-3 may not be opened by anyone other than

Manufacturer personnel. Unauthorized intervention into the inner product

space will void any warranty claims.

Compliance with all specified operating conditions is necessary.

Failure to observe advisory notes or information contained in this Manual or nonconforming

product usage may cause physical injury to the user or material damage to the LMC J 0050 3.

Cable connectors must not be plugged or unplugged, as long as voltage is supplied. Remember

to turn voltage supply off before you begin working on cable connections.

2.2 Laser Classification

The LMC J 0050 3 is a class 2 laser product as stipulated in IEC825 1/DIN EN 60825 1:2001 11

and a class II product under FDA21 CFR. In the event of accidental, short time laser exposure,

the human eye is sufficiently protected by its own optico facial winking reflex. This natural reflex

may be impaired by medication, alcohol and drugs. Although the product can be operated

without taking special safety precautions, one should refrain from directly looking into the laser

beam. Do not direct the laser beam onto persons.

Caution:

There is class 2 laser radiation. Do not look into the beam!

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

Keine Kommentare

Sentek LMC-J-0040-1 Bedienungsanleitung Seite 6